How to create sounds with specific characteristics?

How can I create sounds with MATLAB with the following characteristics:

Sound 1:

pitch: 3 sinusoidal partials of 500, 1000  and 1500 Hz
 duration: 100 ms (including 5 ms rise and fall times)
 amplitude: 80 dB

Sound 2:

like Sound 1, but with a cutting out of 10 ms (5 ms fall / rise included) from the middle of the sound

This is my third try

%%configure signal settings
 duration = 0.1;                % duration in seconds
 amplitude = 0.8;               % amplitude
 f1 = 500;                      % frequency in Hertz
 f2 = 1000;
 f3 = 1500;
 phi = 2*pi*0.5;                % phase offset, e.g.: 2*pi*0.25 = 1/4 cycle
 %%configure output settings
 fs = 44100;                    % sampling rate
 T = 1/fs;                      % sampling period
 t = 0:T:duration;              % time vector
 %%create the signal
 omega1 = 2*pi*f1;              % angular frequency in radians
 omega2 = 2*pi*f2;
 omega3 = 2*pi*f3;
 partial1 = cos(omega1*t + phi)*amplitude;      % sinusoidal partial 1
 partial2 = cos(omega2*t + phi)*amplitude;      % sinusoidal partial 2
 partial3 = cos(omega3*t + phi)*amplitude;      % sinusoidal partial 3
 signal = (partial1 + partial2 + partial3)/3;
 %%plot the signal
 plot(t, signal);
 xlabel('Time (seconds)');
 ylabel('Amplitude');
 title('Complex Signal');
 %%play the signal
 sound(signal, fs);
 %%save signal as stereo wave file
 stereo_signal = [x1; x1]';
 wavwrite(stereo_signal, fs, 'test.wav');

I am wondering how to adjust the amplitude and to implement the rise and fall.

Looking forward to your help! Thanks in advance!

NOTE:-

Matlabsolutions.com provide latest MatLab Homework Help,MatLab Assignment Help for students, engineers and researchers in Multiple Branches like ECE, EEE, CSE, Mechanical, Civil with 100% output.Matlab Code for B.E, B.Tech,M.E,M.Tech, Ph.D. Scholars with 100% privacy guaranteed. Get MATLAB projects with source code for your learning and research.

A window can be anything going from zero to unity. In this case it should reach unity after 5ms from the start. You should know what kind of performance you are looking for, so you can determine what response your window should have.

Often I start with 1/4 of a sine period, since it has the nice properties to start with a ramp and that its derivative is continuous when it meets unity. For instance for time array t with begin time b and end time e of the window;

w = ((1+sin(pi*(t-b)/2/e))/2.*(t>b-e)-1 ) .*(t<=b+e)+ 1;

This equals 0 for t<b, then increases and equals 1 for t>e. Also note that Matlab

SEE COMPLETE ANSWER CLICK THE LINK

How to create sounds with specific characteristics?

How to create sounds with specific characteristics?